Differences

This shows you the differences between two versions of the page.

--- st_mint [2024/12/24 14:08] – [With an emulator] kdev
+++ st_mint [2025/09/12 08:32] (current) – [With an emulator] Recommend 8MB of RAM on Hatari kdev
@@ Line 1: / Line 1: @@
 ====== ST Mint: Opensource Unix for Atari ST ======
 ST Mint  is a [[https://freemint.github.io/|FreeMiNT]] distribution which provides an opensource Unix environment for the 16/32 bits Atari line of computers.
-The target platform are Atari ST(E) and Mist FPGA board with at least 4 MB of RAM, 512MB SD Card [[https://lotharek.pl/productdetail.php?id=48|drive]], ST High Resolution.
+The target platform are Atari ST(E) and Mist FPGA board with at least 4 MB of RAM, 512MB SD Card [[https://lotharek.pl/productdetail.php?id=48|drive]], ST High Resolution. It will also work on Atari TT but is not optimized for those machines.
 ST Mint is distributed in the form of a ready to boot disk image, to use for instance with [[https://lotharek.pl/productdetail.php?id=48|Lotharek's UltraSatan drive]]
@@ Line 35: / Line 35: @@
 ===== With an emulator =====
-Use the downloaded .img file as an emulated ACSI device, and just boot. If you use the [[http://hatari.tuxfamily.org/|Hatari]] emulator, it would be:
+Use the downloaded .img file as an emulated ACSI device, and just boot. If you use the [[http://hatari.tuxfamily.org/|Hatari]] emulator, the command should be:
-<code>hatari --memsize 4 --mono --acsi st_mint-1.5.img</code>
+<code>hatari --memsize 8 --mono --acsi st_mint-1.5.img</code>
 == What's inside ==